Colour |
schwarz
black
negro
чёрный
|
||
Hardness shore A | 90±5 | SHORE | ISO 868 |
Tensile strength | 6 870 | MPa psi | DIN 53 504 |
Tear strength | 5 28 | kN/m lbf/inch | DIN ISO 34-1 |
Spec. gravity | 1640 1,64 | kg/m³ g/cm³ | ISO 1183 |
modulus 100% | 5,5 795 | MPa psi | DIN 53 504 |
Elongation at break | 140 | % | DIN 53 504 |
rebound elasticity | 7 | % | DIN 53 512 |
compression set 1 | 68 | % | ISO 815 |
Min. service temperature | -5 23 | C° F° |
Max. service temperature | 200 392 | C° F° |
Tool abrasion | |
Turnability |
1 testing parameters
24h 70°C 25%
24h 158°F 25%
Deflection
max. service temperature / steam | 170 338 | C° F° |
max. service temperature / hot air, short term | 230 446 | C° F° |
Dieses Material ist etwas härter als Aflas 360. Trotzdem weist es aber vergleichbare Eigenschaften auf.
Alle spezifischen Informationen finden Sie im Datenblatt.
While maintaining all the characteristics of TFE/P Aflas, this material is slightly harder than Aflas 360.
All characteristics you can find in the data sheet.
A pesar de mantener todas las características de TFE / P Aflas, este material es ligeramente más duro que el Aflas 360.
Todas sus características pueden ser encontradas en la hoja de datos.
Этот материал – немного тверже, чем Aflas 360, но имеет такие же характеристики. Всю дополнительную информацию по этому материалу Вы найдете в спецификации.