Colour |
schwarz
black
negro
чёрный
|
||
Hardness shore A | 85±5 | SHORE | ISO 868 |
Tensile strength | 12 1740 | MPa psi | DIN 53 504 |
Tear strength | 10 55 | kN/m lbf/inch | DIN ISO 34-1 |
Spec. gravity | 1220 1,22 | kg/m³ g/cm³ | ISO 1183 |
Abrasion | 140 | mm³ gal | DIN 53 516 |
Elongation at break | 60 | % | DIN 53 504 |
rebound elasticity | 37 | % | DIN 53 512 |
compression set 1 | 7 | % | ISO 815 |
compression set 2 | 7 | % | ISO 815 |
Min. service temperature | -45 -49 | C° F° |
Max. service temperature | 130 266 | C° F° |
Tool abrasion | |
Turnability |
1 testing parameters
24h 70°C 25%
24h 158°F 25%
Deflection
2 testing parameters
24h 100°C 25%
24h 212°F 25%
Deflection
max. service temperature / steam | 130 266 | C° F° |
max. service temperature / hot air, short term | 180 356 | C° F° |
Dieses Material hat sehr gute Eigenschaften bei tiefen Temperaturen, hohe Ozon-, Alterungs- und Witterungsbeständigkeit. Es ist ebenfalls gut geeignet bei polaren Lösungsmitteln (Alkoholen, Ketone, Ester), HFC-Flüssigkeiten sowie Bremsflüssigkeiten auf Glykolbasis.
Als unpolarer Werkstoff ist EPDM nicht beständig bei Mineralölprodukten, Fetten und Ölen.
The material has very good low temperature properties, high resistance to ozone, aging and weathering, as well as polar solvents (alcohols, ketones, esters) and HFC liquids and Glycol based brake fluids.
However, it is not resistant to petroleum products, fats and oils.
El material tiene propiedades muy buenas para bajas temperaturas, alta resistencia al ozono, al envejecimiento y la intemperie, así como a los solventes polares (alcoholes, cetonas, ésteres), líquidos HFC y líquidos para frenos a base de Glicol.
Sin embargo, no es resistente a productos de petróleo, aceites y grasas.
Этот материал имеет хорошие показатели применения его в среде с низкими температурами. Он обладает высокой устойчивостью к озону, старению и различным погодным условиям. Этот сополимер хорошо подходит для использования его в полярных растворителях (алкоголь, кетоны, эфиры), с жидкостями типа HFC, а также с тормозными жидкостями на основе глюколя. EPDM не устойчив к нефтепродуктам, жирам и маслам.